1 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 1 inductors (coils) > chip inductor (chip coil) > power inductor (multilayer type) 2012.11.8 o this data sheet is applied for chip inductors (chip coils) used for general electronics equipment for your design. chip inductor (chip coil) power inductor (multilayer type) lqm2mp_g0 series (0806 size) c dimensions (in mm) 2.00.15 0.50.2 1.60.15 0.90.1 c packaging code packaging minimum quantity l 180mm embossed tape 3000 b bulk(bag) 1000 c rated value ( p : packaging code) part number inductance rated current dc resistance self resonance frequency (min.) lqm2mpnr47mg0 p 0.47h 20% 1600ma 0.060ohm 25% 100mhz lqm2mpnr47ng0 p 0.47h 30% 1600ma 0.060ohm 25% 100mhz lqm2mpn1r0ng0 p 1.0h 30% 1400ma 0.085ohm 25% 60mhz lqm2mpn1r5mg0 p 1.5h 20% 1200ma 0.11ohm 25% 50mhz lqm2mpn1r5ng0 p 1.5h 30% 1200ma 0.11ohm 25% 50mhz lqm2mpn2r2mg0 p 2.2h 20% 1200ma 0.11ohm 25% 40mhz lqm2mpn2r2ng0 p 2.2h 30% 1200ma 0.11ohm 25% 40mhz lqm2mpn3r3ng0 p 3.3h 30% 1200ma 0.12ohm 25% 30mhz lqm2mpn4r7mg0 p 4.7h 20% 1100ma 0.14ohm 25% 20mhz lqm2mpn4r7ng0 p 4.7h 30% 1100ma 0.14ohm 25% 20mhz test frequency: 1mhz class of magnetic shield: magnetic shield of ferrite operating temperature range: -55 to +125c c inductance-frequency characteristics (typ.) 0.1 10 1 inductance (h) 0.1 1 10 100 frequency (mhz) 0.47h 1.0h 1.5h 2.2h 4.7h 3.3h c inductance-current characteristics (typ.) 0.1 10 1 inductance (h) 1 10 1000 10000 100 current (ma) 0.47h 4.7h 3.3h 1.5h 2.2h 1.0h continued on the following page.
2 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 2 inductors (coils) > chip inductor (chip coil) > power inductor (multilayer type) 2012.11.8 o this data sheet is applied for chip inductors (chip coils) used for general electronics equipment for your design. continued from the preceding page. c temperature rise characteristics (typ.) current (ma) temperature rise (c) 40 30 20 10 0 0 400 800 1200 1600 0.47h 1.0h 1.5h 2.2h 3.3h 4.7h c ! caution/notice ! caution (rating) do not use products beyond the rated current as this may create excessive heat. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering pro? le where peak solder temperature is below the tin melting point is used. please con? rm the solderability of tin plating termination chip before use.
|